China in 3D – here do 3D printers / Blog of the company Top 3D Shop / Geektimes

At the end of March, we went to China, pursuing two main goals: visiting our main suppliers of 3D equipment, Concentrated in Shanghai and its suburbs, as well as the study of a new direction in CNC machines and the search for direct manufacturers-suppliers at the exhibition CHCMT 2017.
From this note you will learn about the first part of the trip – a visit to our suppliers of 3D equipment.

After one day of adaptation in a fairly comfortable and modern metropolis, which is now Shanghai, we went to the office of RAISE 3D. Their office is located in a new respectable array of buildings, not far from the center, but in this area there is already something that vaguely resembles the industrial zone.

RAISE 3D

After getting acquainted with the director for Sales, and after completing the mutual presentation of our companies, we learned that RAISE is experiencing an explosive growth in sales – production is struggling with shipments of more than 500 cars per month. Then we were invited to the showroom, where we were met by a solid astronaut more than two meters high, hinting at the fact that large format and stable printing is a business card of RAISE printers.

Here we got to know more about the 2-extruder modification of N2 Plus.

The two-material seal has small blotches, but for a simple design with two extruders, the result is quite good.

]

The issue of the expediency of FDM-printing with a layer thickness of 50 μm and less, spent and her time and receive an always controversial. Nevertheless, all the printouts presented were of high quality and smooth surface.

]

We came to the conclusion that RAISE 3D printers have a sufficient list of properties attractive to a wide range of users:

• Huge print area: up to 305 x 305 x 610 mm
• High quality print, with a layer thickness of up to 10μm
• The possibility of printing two materials
• Quality assembly and convenient touch screen
• A very democratic price

Next we went to the Mankati office located already far away from the center of Shanghai. We do not sell their printers often, but the announcement of the new model and the location convenient for us unequivocally determined what to look for.

Mankati

It was difficult to assess the company itself, It is in the process of moving – in most rooms reigns corresponding disorder. In the room where we were invited there was an assembly shop where two workers were assembling a new model E180 :

Of the main advantages of the Mankati E180 listed on their website:

• Connecting with Ethernet and WiFi
• Air filter for air filtration from the chamber (this is very actual in China)
• Camera for monitoring the printing process
• Material flow sensor, for the possibility of refueling the rod
• High temperature of hot-end, table and chamber: 350 ° C, 110 ° C and 60 ° C for engineering materials
• High quality printing
• Rail guides

We were very interested in the possibility of printing with various materials, including PEEK, but the representative of Mankati, citing the high cost of the material itself, could not show us any samples.

A very small screen with an inconvenient location, with even smaller ones Letters on it, push-button control from the side, and also a USB port, generally located on the rear panel – our engineers would obviously not be delighted with this decision, since they have to repeatedly print new files during the working day. Maybe next time we had to go to the neighboring city of Hangzhou, which is 200 kilometers from Shanghai. We easily crossed this distance on one of the high-speed trains that develop speeds of up to 350 km / h, the network of lines of which exceeds the length of similar lines throughout Europe and Japan together.

Shining 3D

In Hangzhou, at the station, we were met by Cyril Xia – manager of Shining 3D responsible for sales in Russia. Together with him we went to their office, which is a large separate building. We did not remove the building from the outside, but, so that you can imagine the scale, I offer several photos of the reception, as well as lounges with a volleyball court and a huge terrace:

In the building also There are a lot of spacious showrooms, separate rooms for developers of various equipment, sales departments and working areas of other employees.
After a hearty lunch from corporate chefs, we went on a tour of the office.

First we were shown the classes in which the training seminars and practical classes for schoolchildren are conducted – so the company contributes to modern education and promotes 3D technologies in China.

There are a lot of beautiful figures of various superheroes and animals in classes. I would like to catch the company using other manufacturers’ printers, but all models were glued from parts of the smallest working chamber size of their small Einstart-S .

Running a little forward, I will show how this is all printed in their production:

]